index about us product show news faqs factouy tour feedback contact us

  Product Category

12V and 24V strip
110V or 220V strip
LED Tube Light
MR16 spot
GU10 LED Spot
LED Bulb
LED Down Light
AR111 Lamp
LED Panel
LED PAR Lamp
LED Flood Light
LED Wall washer
LED Jewelry Lamp
LED Controller
LED Transformer
Other

Contact Us

              

   Follow us on Blog

 

:   info@pwled.com

:    powerledlight@hotmail.com

:  powerledlight

:  86-756-553 6296

          86-756-619 1192

  


MSN:

Skype:
 
 
Products
RGB controller

Content: Product Name: RGB controller
Descriptions:

ITEM:PW-CONTROLLER-02

Features
The RGB controller is designed for LED lighting dimmer, controling modules, LED ribbons, LED bars, High Power LED modules and other LED lighting fixtures.12V DC power supply and the controller form the complete LED lighting dimmer system.

Specification
Working temperature: -25~60 º C
Voltage in/output: 12V DC
Measurement: 127*65*25mm
Connection: Common Anode
Rated load power: 144W
Rated load current: 10A
Max load current: 15A
Output: Three CMOS output.
Controling method: Four buttons, wireless control(effective within 100 meters).
Buttons (from top to bottom): MODE, UP, DOWN, ON/OFF
MODE: To press one time to achieve one mode. Total 11 modes.
UP: To speed up color changing. To press one time, the colors change will be more faster. To press steadily, the changing will become quicker until to the quickest. The green signal will light when pressing unless the changing rates reach to the highest.
DOWN: To slow down the color change. Same as the UP button method.
ON/OFF: To press one time, the controller will work or shut off.

Mode: 1. Static red, 2. Static green, 3. Static red/green mix. 4. Static blue, 5. Static red/blue mix, 6. Static green/blue mix, 7. Static red/green/blue mix. 8. Jumpy cycle changing, 9. Disorder flash changing, 10. Gradual cycle changing, 11. Disorder gradual changing.

Notice
1) Make sure working voltage of products must be 12V DC or it will be damaged.
2) The wireless remote control should be powered by 23A, 12V battery.
3)Please connect according to the above sketch map. The connection port can be pulled out.
4) When the power is on, the red indicator will light while the green indicator doesn't. The controller is waiting for work. To press the ON/OFF button, it will began to work. The green indicator will flash when press any button unless it is out of work.
5) UP and DOWN button: It can work only when the controller is in color changing mode.
6) Our packing is one wireless control matched one RGB controller. Please do not use other wireless control or it will not work.


 
Copyright ¬©Led strips | Led spots | Led bulbs | Led down light | Led tube light | Led controller | Led transformer/GU10 LED/MR16 LED/E27 LED/5W RGB led spot 2009 All Rights Reserved  Blog XML sitemap   Support By:CifShanghai.com