PWLED.COM BLOG

led strips,led spots,led bulb,led tube light,led panel

By

LED DMX Decoder,3 Channel,4A

The 12VDC RGB LED DMX Decoder can run on stand alone mode or under DMX control. It receives standard DMX-512 digital control signals and converts to PWM (pulse width modulation) signals for driving LEDs. Connect to any DMX digital console to achieve dimming and and various color changing patterns.

422 12 QQ图片20131126122616 22

Product Specifications

Applications:  Neccessary conversions of DMX to PWM signals for driving LEDs
Function: Control 3 channel 12VDC LED products or any one RGB LED Light Bar or Strip using DMX console or standalone mode with onboard DIP switches
Operating Voltage:   12~24 Volts DC (use only 12VDC power with 12VDC LEDs)
Connection Mode:   Common Anode (+)
Output:  Three CMOS output RGB
Maximum Load Current:   4 Amps/channel (12 Amps total)
Output Power:  144 Watts
Overall Size:  (L)166 X (W)67 X (H)41 mm
Control Method:  DMX512 RJ45 / DMX512 3-pin XLR / Standalone DIP switches
Standalone Modes: 9 total (7 static and 2 dynamic) see desc. below
Operating Temperature: -25~60°C

Control Functions

1.) Standalone mode is activated when FUN(10)=ON, the following functions can be set using address codes DIP switch

Coding Switch Function
switch 1-9=OFF OFF
Switch 1=ON Red
Switch 2=ON Green
Switch 3=ON Blue
Switch 4=ON Yellow
Switch 5=ON Purple
Switch 6=ON Cyan
Switch 7=ON White
Switch 8=ON Seven Color Change Instant (speed function activated – see coding below)
Switch 9=ON Seven Color Change Fading (speed function activated – see coding below)
Coding Switch Speed Function (When 8 or 9=ON and 10=ON)
Switch 1-7=OFF Slowest Color Change Mode
Switch 1=ON 1 Step Faster
Switch 2=ON 2 Steps Faster
….. …..
Switch 7=ON Fastest Color Change Mode

2.) DMX signal can be received when FUN(10)=OFF, along with using either the DMX512 RJ45 input/output interface or the DMX512 3-pin XLR input/output interface

Typical Wiring Schematic

 

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>